Announcement

Collapse
No announcement yet.

Small Glans Hanging and ADS Question

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Small Glans Hanging and ADS Question

    Hi everyone,

    Iíve recently decided to pick up PE again after a long hiatus, spending the first month just jelqing I am now slowly introducing pumping and hanging into the mix, I figured I would start the hanging gently with moderate duration All day extender work. But upon buying the extender (MaleEdge Pro) Iíve found that due to my small glans relative to midshaft the wrap is very quickly slipping. The only remedy to this I have been able to produce thus far is semi-engorging my glans with blood and wrapping behind it, but even then to prevent slippage I have to attach the extender so tight to the point that my glans circulation is severely inhibited and my glans turn purple within 5 or so minutes, thus limiting my extender periods to 10 or so minutes.

    I suffer from phimosis, but am able to retract my foreskin while flaccid, phimosis doesnít negatively effect me in any ways aside from the poor aesthetics, so I previously have not been too concerned with it. But with the considerable amount of extra foreskin it provides combined with my relative small glans the extender work is rendered near pointless.

    Which leads me to my question, Would I be well served with a Bib Hanger? Or are there any hangers that would be recommended? I believe the optimal hanger for my case would be one that is sufficiently tight as to grip my midshaft without relying on my glans as an anchor in any way.

  • #2
    pomskee,

    >Which leads me to my question, Would I be well served with a Bib Hanger? Or are there any hangers that would be recommended? I believe the optimal hanger for my case would be one that is sufficiently tight as to grip my midshaft without relying on my glans as an anchor in any way.<

    The Bibs were designed to attach to the shaft, and avoid the head. So when used correctly, the hanger should function for about anyone that has a shaft.

    Bigger

    Comment


    • #3
      Thanks for the reply Bib, I should have asked this in my previous post but what size bib would you recommend for someone 6.5inch NBPEL x 5.5inch Base girth, 5.25 Mid girth and ~5inch glans girth (I know, i'm literately a witches' hat).

      I feel the starter may be best suited to my girth, but the standard with its 1 inch longer surface area may give better grip.

      I did read the recommended penis dimensions for each hanger but found them slightly vague, perhaps i'm an idiot.

      Comment


      • #4
        pomskee,

        >I should have asked this in my previous post but what size bib would you recommend for someone 6.5inch NBPEL x 5.5inch Base girth, 5.25 Mid girth and ~5inch glans girth (I know, i'm literately a witches' hat).<

        The Starter model.

        >I did read the recommended penis dimensions for each hanger but found them slightly vague, perhaps i'm an idiot.<

        They are a bit vague on purpose. Those are absolute minimum measures to have any chance of success using the regular. Unless guys are already very large, the Starter is usually their best option.

        Bigger

        Comment


        • #5
          Thanks Bib, also I must say your knowledge and dedication to the craft is admirable!

          Comment

          Working...
          X