Announcement

Collapse
No announcement yet.

Homemade Bib hangers and ULI thing instructions

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Re: Homemade Bib hangers and ULI thing instructions

    Originally posted by Gentle Mr Justin
    Originally posted by RB
    You're right, I had looked at your pics before, just wasn't paying close enough attention to the UT as I am still focused on length.

    If you get some pics of the thing alone from a few angles, that would be sweet and very helpful to many, I'm sure

    The UT in the pics is with the pipe, not hose, right? You have both, which do you prefer?
    RB,

    I am about to post those pictures for your veiwing back in the pictures section.

    With regards to which one I preferr well my jury is still out on that. You see the first uli device was the hard platics pvs style one. I remember getting fully erect then wrapping with the thera band. Just wrapping with some tension applied to an already erect shaft gets the process going. Then I slide the hard plastci device on and tighten down some. My unit expanded somemore and then when I push the device deep into my base my unit just went bang and then I tightened down some more and I was exploding. Please bare in mind this was the first time I had ever done uli work and I was so excited at the instant respond but also very frightened because I had never expereinced or known what uli induced pressure was like.

    I can say that this pressure was and is intense. I have since that experence also expereinced what I believe is fluid build up cause I have gone to hard at uli work to quickly, but thats all part of the learning expereince but I think the hard reinforced hose is also good. It is easier to use and quicker to be tightened but both work.

    Can I suggest you make both the hard one and the reinforced one. They are such a peice of piss to make.

    One thing that you will need to discover about yourself is if you respond better from being erect before you squeeze down with either device or do you do it like bigger advises and get semi erect then appli the device and tighten engorge tighten engorged. I say this because I am right now in force lay off from uliing. I love uli work but I did go to hard to early and despite the fact that I posted to bigger that things were going well I am now at the point of understanding just how intense these uli exercise is.

    What is interesting is guys like BIg Gritha, redzulu, SWM, robbie7au (who is a personal friend of mine) and others all start there clamping sets with a hard erection. Bigger advised not too. I will be interested to read of your expereinces. I myself realized that because I wasn't getting good sessions in the last few months I had been overdoing it by trying to tighten the device down in an effort to increase pressure. This is wrong way of doing it. each person needs to get that balance of tightening down some and getting hard more letting pressure development then tightening down more. Bigger has spoken of this before and I can report that I have been over zealous at the engorgemnt process at times hence my decision to have a really good break from uli work. My erections in the morning were poor however when I was doing uli work effectiveley my erections in the morning were insanely hard.

    I think you will understand more what I have written here once you gett into it but be very careful. This uli work is very intense if done properly and I think very dangerous if done poorly regardless of good intentions.

    I will go and post those pictures for you now RB.

    GMJ
    I had to chime in to correct a mis-statement. I have never, nor EVER advised to begin clamping type exercises completely erect. I ALWAYS start flaccid, and even instruct to do so when coaching other men on clamping....even in VIDEOS I have done on clamping, not ONCE have I said ''start erect''. Just had to clear that up.

    Comment


    • #32
      Re: Homemade Bib hangers and ULI thing instructions

      SWM,

      Always good to hear from you. Wish you would hang around.

      Bigger

      Comment


      • #33
        Re: Homemade Bib hangers and ULI thing instructions

        SWM,

        My mistake.

        GMJ

        Comment


        • #34
          Re: Homemade Bib hangers and ULI thing instructions

          Bib,
          is there any chance you will offer the Uli device for sale? I am going to pick up a Bib starter to try out to see if it's useful for traveling, and would love to finally have the Uli device and thought I would see if one is for sale before I tried to figure out how to use tools, and how to navigate a parts store. ops:
          I have gained all the length I need through the Bib hanger awhile back, and now I can't seem to make the same progress with girth.

          I have pumps and cable clamps that I haven't made progress with, yet.
          I tried to pump for many sets a day for a few months just like I would if I was hanging, and after I took a few days off to let the swelling go down all the way to measure, I gained nothing, and it even seemed like I was smaller than before I started!
          Cable clamps are okay but I don't find them comfortable to use for a period of months to follow a strict routine, and have to manually stimulate myself to stay engorged. Which all may be a problem with my technique.

          Is the Uli device a better tool than the cable clamp? I am really hoping it is since I am eager to fill out my pants and can't seem to find which path to take and stick with.

          Comment


          • #35
            Re: Homemade Bib hangers and ULI thing instructions

            bluray,

            >is there any chance you will offer the Uli device for sale?<

            No. I have more on my plate than I can handle now. Further, it will be hard to make one that works properly, and is universally adjustable.

            >Is the Uli device a better tool than the cable clamp?<

            I have never used a cable clamp, so I cannot judge.

            Bigger

            Comment


            • #36
              Re: Homemade Bib hangers and ULI thing instructions

              bluray,

              >Is the Uli device a better tool than the cable clamp? I am really hoping it is since I am eager to fill out my pants and can't seem to find which path to take and stick with.<

              In looking at the design of the Uli thing, my personal opinion is that the cable clamps are better, for a few different reasons.

              1. Safety. The cable clamps are easy on and easier off. Certain ones that Walmart sells have spring loaded releases.

              2. Comfort. The clamps are actually built more like the shape of the penis. They also are not rigid or metal.

              3. Time and cost. They are so cheap and you don't have to make anything, so no worries about whether you built it right or not.

              Just my $.02.
              Starting point: Nov. 2, 2009/BPEL 5.75 x 4.75 inches.
              Recent Past: BPEL 7 1/4 x 5 1/4 inches.
              Current: 7 3/8 x 5 1/2
              Goal: BPEL 8 x 6 inches.

              Comment

              Working...
              X