Re: Rice sock, duct tape fulcrum
E,
I don't have my Bib yet, nor have I constructed one of these rudimentary devices. Regardless, after reading this entire thread, it seems you are making too much of this. Bib's first post pretty much says everything you need to know, and Manzwa posted pictures of a finished product.
Try to focus on making a shape that will support your penis on a horizontal plane (height) and that is long enough to run from your taint to the edge of the hanger (length). The distance between your legs should be confortable (width). To make the channel for your penis to sit in, simply pull the tape tighter around the middle, which will automatically create the desired effect. I wouldn't concentrate too much on making it overly deep or extreme.
When you apply weight, the skid of the hanger will press against the plastic piece on the front of the fulcrum (I don't have one, but from the pictures and description I believe this is correct). If the hanger starts to stretch your penis to the extent that the hanger is pointing more than 45 degrees (halfway between straight out and straight down) downward, you need to adjust the dimensions of your fulcrum. If during a set, you can try what RB has done...inserting 3.5 inch floppy discs between the hanger and the plactic on the fulcrum, this should bring the angle back up above 45 degrees. If this happpens consistently, you will have to either add height or depth to the fulcrum so the skid of the hanger is flush with the plastic. You don't have to build a new one, however, just add material to either the bottom or back. You don't want to add to the top (because the channel is there) or the front (because the plastic is there).
Remember, I haven't built one yet, but the decription and design is pretty simple. Don't make it overcomplicated. Good Luck.
Rush
E,
I don't have my Bib yet, nor have I constructed one of these rudimentary devices. Regardless, after reading this entire thread, it seems you are making too much of this. Bib's first post pretty much says everything you need to know, and Manzwa posted pictures of a finished product.
Try to focus on making a shape that will support your penis on a horizontal plane (height) and that is long enough to run from your taint to the edge of the hanger (length). The distance between your legs should be confortable (width). To make the channel for your penis to sit in, simply pull the tape tighter around the middle, which will automatically create the desired effect. I wouldn't concentrate too much on making it overly deep or extreme.
When you apply weight, the skid of the hanger will press against the plastic piece on the front of the fulcrum (I don't have one, but from the pictures and description I believe this is correct). If the hanger starts to stretch your penis to the extent that the hanger is pointing more than 45 degrees (halfway between straight out and straight down) downward, you need to adjust the dimensions of your fulcrum. If during a set, you can try what RB has done...inserting 3.5 inch floppy discs between the hanger and the plactic on the fulcrum, this should bring the angle back up above 45 degrees. If this happpens consistently, you will have to either add height or depth to the fulcrum so the skid of the hanger is flush with the plastic. You don't have to build a new one, however, just add material to either the bottom or back. You don't want to add to the top (because the channel is there) or the front (because the plastic is there).
Remember, I haven't built one yet, but the decription and design is pretty simple. Don't make it overcomplicated. Good Luck.
Rush
Comment